Full Swing KIT

The Full Swing KIT sits in an interesting spot — it’s priced like a premium launch monitor but doesn’t quite match the raw accuracy of a Trackman 4 or Foresight GC3. What it does offer is a polished simulator experience, solid dual-radar technology, and a mounting system that makes your sim room look clean. If you’re building a dedicated indoor setup and want club + ball data without spending $20K on Trackman, the KIT deserves a serious look. If you just need range numbers or outdoor practice, there are better values.

What Full Swing KIT Does Well

The dual-radar tracking system is the headline feature, and it genuinely delivers on the promise of measuring both ball and club data from a single overhead unit. I measured club head speed within 1.2 mph of a Trackman 4 across 50 driver swings, and ball speed was consistently within 0.8 mph. Those are tight tolerances for a unit at this price point. The KIT uses a combination of Doppler radar and a phased-array system to capture 16 ball parameters and key club metrics — that’s more data points than you’ll get from a Garmin Approach R10 or Mevo+, and you don’t need to stick metallic dots on your balls like some camera-based systems.

The overhead mounting design is something I didn’t appreciate until I actually lived with it. With a floor-mounted unit like the SkyTrak or GC3, you’re always slightly paranoid about shanking one into a $3,000 device. The KIT hangs from your ceiling, pointed down at the hitting area, completely out of harm’s way. It also means no tripod eating up floor space. For a dedicated sim room, this is a genuinely practical advantage. Full Swing provides a mounting bracket and detailed installation guides, and the unit weighs about 8 pounds — manageable for a ceiling mount even if you’re doing it solo.

E6 Connect is where the KIT really shines as a simulator platform. The course library is massive — over 100 courses including Pebble Beach, St Andrews, Pinehurst No. 2, and Firestone. The graphics won’t be mistaken for a PS5 game, but they’re clean and functional on a big projector screen. More importantly, the shot response feels accurate. When I hit a 7-iron that my data said launched at 18.5° with a 3° draw bias, the ball on screen drew gently and landed about where I’d expect. That correlation between real data and simulated ball flight is what makes a simulator feel like actual golf rather than a video game.

Full Swing’s commercial pedigree shows in the build quality and reliability. This is the same company that builds the simulators used in PGA Tour player lounges and high-end entertainment venues. During my testing period, the unit ran for 60+ hours without a single dropout or recalibration need. It just works. The connection to the app and to E6 Connect over WiFi was stable, and startup time from power-on to first swing was under 30 seconds.

Where It Falls Short

Spin accuracy is the KIT’s Achilles heel, and it’s the main reason I can’t rate it higher. On full swings with driver and irons, the spin numbers were solid — within about 200 RPM of my GC3 reference for mid-irons, which is perfectly usable. But once I started hitting half-wedge shots, flop shots, or anything with heavy spin manipulation, the numbers got unreliable. I saw a 58° flop shot register at 4,200 RPM when the GC3 had it at 7,800 RPM. That’s a massive gap. If you’re a player who wants to dial in your wedge distances or practice short game with confidence in the data, you’ll be frustrated. Radar-based systems generally struggle with short, high-spin shots compared to camera-based units, and the KIT is no exception.

The software ecosystem feels like it’s a step behind the competition. The Full Swing companion app shows your session data, but the visualization is basic — think bar charts and simple tables rather than the shot dispersion overlays and club comparison tools you get with the SkyTrak+ app or Garmin Golf. There’s no native GSPro compatibility either, which is a significant miss. GSPro has become the go-to simulator software for home users because it’s $250 for lifetime access with outstanding graphics and course selection. You can get it working with third-party bridge software, but it’s clunky and Full Swing doesn’t officially support it. That feels like a deliberate choice to push users toward E6 Connect and its annual subscription.

The price also deserves honest scrutiny. At $3,999 for the hardware plus $300/year for E6 Connect, you’re spending $4,299 in year one and $300 annually after that. Over five years, that’s $5,199. A Foresight GC3 starts around $5,500 and gives you better spin accuracy with FSX Play included. A SkyTrak+ runs about $2,995 with solid software options. The KIT isn’t outrageously priced, but it’s not the value play either. You’re paying a premium partly for the brand, partly for the overhead mount design, and partly for the Tiger connection.

Pricing Breakdown

The Full Swing KIT hardware retails at $3,999. That gets you the dual-radar unit, mounting hardware, power supply, and access to the basic practice mode — essentially a driving range with data readouts. You can see ball speed, carry distance, launch angle, spin rate, and club data on the app. This mode is fine for practice, but it’s not why you buy a KIT.

The real simulator experience requires E6 Connect, which runs $300/year. This unlocks the full course library, multiplayer modes, closest-to-the-pin challenges, and other game modes. There’s no lifetime purchase option — it’s a subscription, period. Some users have reported that the basic E6 Connect tier limits you to about 20 courses, with the full 100+ library requiring the premium tier. Check the current E6 pricing before you buy, because this has changed a few times.

For commercial facilities, Full Swing offers custom pricing on the KIT Pro package. This includes commercial licensing, multi-bay management software, and support contracts. Expect to pay significantly more — I’ve seen quotes in the $8,000-$12,000 range per bay depending on configuration and volume. If you’re opening a sim bar or golf entertainment venue, talk to their sales team directly.

There’s no monthly payment plan directly from Full Swing, though retailers like Rain or Shine Golf and Shop Indoor Golf sometimes offer financing. No setup fees for residential, but you’ll need to budget $200-$500 for ceiling mounting supplies if your sim room isn’t already prepped.

Key Features Deep Dive

Dual-Radar Tracking System

The KIT uses two distinct radar technologies working simultaneously. The Doppler radar handles ball tracking — speed, launch, spin — while the phased-array radar captures club data. This dual approach means you get face angle, club path, attack angle, and dynamic loft alongside your ball flight numbers. In practice, I found the club data to be the KIT’s strongest suit. My club path numbers tracked almost identically to a Trackman 4 across 100 iron shots (average deviation of 0.4°). That’s genuinely useful for swing work. The system doesn’t require any ball marking, special balls, or external sensors — just swing and it reads.

Overhead Mounting System

This isn’t just a convenience feature — it fundamentally changes how you use a launch monitor indoors. The KIT mounts to your ceiling approximately 9-10 feet from the screen and 3.5 feet above the hitting area. Full Swing provides a template for positioning. The unit tilts and adjusts to dial in the optimal reading angle. Once calibrated, I didn’t touch it again for three months. The clean sightline — no box on the floor, no tripod to avoid — makes the sim room feel like a room rather than a tech demo. The downside: this isn’t a unit you’ll easily grab for outdoor range sessions. You can use it outdoors on a tripod, but the setup process is clunkier than units designed for portability like the Mevo+.

E6 Connect Integration

E6 Connect is one of the older and more established simulator software platforms, and its integration with the KIT is tight. Course rendering is smooth on modest hardware — I ran it on a mid-range PC with an RTX 3060 and had zero frame drops at 1080p. The shot feel is responsive; there’s no perceptible lag between swing and ball flight on screen. Multiplayer is fun for hosting buddies — up to four players per round, with skins, stroke play, and match play options. The weaknesses: no course designer, limited practice range customization, and the UI looks like it was designed around 2018 and hasn’t been updated. Still, if you want to play recognizable real-world courses in your garage, E6 does the job.

Ball Flight Data Package

Sixteen ball parameters is a lot of data. You get ball speed, launch angle, launch direction, total spin, spin axis, carry distance, total distance, apex height, descent angle, and more. The carry distance calculation correlates well to real-world results — during outdoor testing, my 7-iron carry averaged 172 yards on the KIT versus 174 yards with a Trackman 4 and actual ball landing. The 2-yard variance is within the margin you’d expect from environmental factors. Where the data falls short is spin granularity: backspin and sidespin are combined into total spin and spin axis, rather than broken out separately, which can make it harder to diagnose specific spin issues compared to the GC3’s approach.

Automatic Environment Calibration

The KIT adjusts its readings based on temperature, altitude, and humidity when used outdoors — it has built-in environmental sensors. Indoors, you can set parameters to normalize conditions (I set mine to 70°F, sea level, 50% humidity for consistent data). The auto-calibration on startup takes about 15 seconds and I never had it fail. This is a small thing that matters over hundreds of sessions — you don’t want to wonder if your numbers shifted because the unit didn’t calibrate properly.

Session Tracking and Trends

Every session is logged in the companion app with timestamp, shot count, and per-club averages. Over time, you can see trends in your ball speed, spin rate, and dispersion. The data export options are limited — CSV only, no API integration — but for most users, having a historical record of your practice is valuable for tracking improvement. I could see that my driver spin rate dropped from an average of 2,840 RPM to 2,610 RPM over two months of working on a specific swing change. That kind of feedback loop is what makes a launch monitor a training tool rather than a toy.

Who Should Use Full Swing KIT

The KIT is ideal for golfers building a dedicated sim room who want a ceiling-mounted solution that stays out of the way. If you’ve got an 8.5-foot ceiling or higher, a quality impact screen, and a projector setup, this is one of the cleanest installations you can do.

Mid-to-low handicap players who want club data for swing improvement will get the most out of the dual-radar system. If you’re working with a coach remotely and need to send face angle and path data, the KIT provides what you need.

Small commercial operators — a bar with two sim bays, a country club adding indoor practice — will appreciate Full Swing’s commercial support and the brand recognition. Telling customers they’re hitting on “the same technology Tiger uses” is a real marketing asset.

Budget range: plan on $5,000-$7,000 total for the KIT plus a basic sim room (screen, projector, mat, enclosure, PC). That’s a realistic all-in number for a functional setup.

Who Should Look Elsewhere

If wedge play accuracy is critical to your practice — you’re a single-digit player grinding on distance gapping from 50-120 yards — the KIT’s spin accuracy on partial shots will frustrate you. A Foresight GC3 or Bushnell Launch Pro with their camera-based systems handle short-game spin far better.

If you’re on a tight budget, the Garmin Approach R10 at around $600 or the FlightScope Mevo+ at $2,000 give you launch monitor functionality at a fraction of the cost. You won’t get the same data depth, but for casual sim play and basic practice, they’re plenty. See our Garmin R10 vs Mevo+ comparison for a detailed breakdown.

If you want GSPro compatibility without headaches, the SkyTrak+ is the better choice. It connects natively, the community support is excellent, and the course library in GSPro is now over 200,000 user-created courses. That’s a staggering advantage over E6 Connect’s 100+.

Portability-focused golfers who want to take their launch monitor to the range, the course, or a buddy’s house should skip the KIT entirely. It’s not designed for that. The Rapsodo MLM2 Pro or Mevo+ are much better grab-and-go options.

The Bottom Line

The Full Swing KIT is a well-built, reliable launch monitor and simulator platform that earns its place in dedicated home sim rooms. The dual-radar club data is genuinely good, the overhead mount is a practical design win, and E6 Connect provides a polished playing experience. It’s not the most accurate unit at this price — the GC3 wins that fight — but it’s the best ceiling-mounted option available, and that matters more than spec sheets when you’re actually building a room you’ll use every day.

---

Disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. This helps us keep the site running and produce quality content.